NORMA AUDIO ELECTRONIC
T. +39 (0) 372.493113 | E-Mail: info@normaudio.com
– 5 digital inputs, USB, 2 x SPDIF RCA, SPDIF OPTICAL, AES-EBU.
– USB input and SPDIF full bandwidth, up to 24 Bit / 768 KHz.
– Possibility to customise for each digital input all parameters, including the value of oversampling.
– Possibility to use as the master A/D clock source the local oscillator or the clock form input signal.
– Two separate local clock oscillator for the two values . 22MHz / 24 MHz (44.1 / 48KHz).
– Local Oscillator high stability, low Jitter and low phase noise.
– Possibility to configure one of the 2 RCA inputs as digital output.
– NORMA Proprietary DAC, A-DAC model 1.
– Proprietary I-V architecture conversion.
– Analogue output stage based with full discrete devices amplifier.
– Extreme low noise, high resolution and high speed.
– Wide band ( >2 MHz ) schematic topology.
– RCA and Balanced output connection.
– Separate power supply for Digital and Analogue Output stage.
– High filtering capacity with numerous low impedance capacitors.
– 13 Powers supply regulators.
– Full aluminium non-magnetic frame.
– Toroidal transformer specially designed for audio applications.
– Remote control of all functions.
Connections Inputs
IN1 : USB, 2.0 High Speed
IN2 : SPDIF RCA, 75Ohms
Connections Inputs
IN3 : AES/EBU XLR, 110Ohms
IN4 : TOSLINK OPTICAL, 96 KHz, (192.0 KHz may be achieved, but not guaranteed)
Connections Inputs
IN5 : SPDIF RCA, 75Ohms (IN5 can be set as SPDIF Output by CD Mechanism)
Sampling Frequencies
44.1 Khz – 768.0 Khz; DSD: Max x512
Clock performances
+/- 2ppm typ. at 25°, +/- 10ppm at 60°
Connections Outputs
Line RCA output, XLR Balanced
Outputs Voltage
3.0 V RMS (+10 dBV) RCA (at 0 dB), 6.0 V RMS (+16 dBV) XLR(at 0 dB)
Output Impedance
200 ohm
Analogue Output Filter
0,0 to 180 kHz +/- 3 dB
Analogue Stage Frequency Response
0,0 to 2MHz +/- 3 dB
Configuration
Solid state
D/A Converter
NORMA Proprietary DAC, A-DAC model 1
I/V Conversion
I/V Conversion by proprietary topology with discrete component
Output Stage
Proprietary topology with discrete component, high linearity & low noise
Supply
230 V AC / 50 Hz, (100V AC or 115 VAC / 50-60Hz in some country)
Dimensions (HxWxD)
75 x 430 x 350 mm
Weight
10 Kg
Note
DAC Source with full remote control