amplificatore integrato Revo HS IPA-1 alta fedeltà

– 5 digital inputs, USB, 2 x SPDIF RCA, SPDIF OPTICAL, AES-EBU. USB input and SPDIF full bandwidth, up to 32 Bit / 384 KHz & DSD 512.

– Possibility to customize for each digital input all parameters, including clock source, phase.

– Possibility to use as the master D/A clock source the local oscillator or the clock form input signal.

– Two separate local clock oscillator for the two values , 22MHz / 24 MHz (44.1 / 48KHz).

– Local Oscillator high stability, low Jitter and low phase noise.

– Two PCM 24 Bit Digital to Analogue converter.

– Proprietary I-V architecture conversion.

– Analogue output stage based with full discrete devices amplifier.

– Extreme low noise, high resolution and high speed.

– Wide band ( >2 MHz ) schematic topology.

– RCA and Balanced output connection.

– Separate power supply for Digital and Analogue Output stage.

– High filtering capacity with numerous low impedance capacitors.

– 15 Powers supply regulators.

– Toroidal transformer specially designed for audio applications.

Connections Digital Inputs

IN1: USB, 2.0 High Speed
IN2: SPDIF RCA, 75Ohms

Connections Digital Inputs

IN3: AES/EBU XLR, 110Ohms
IN4: TOSLINK OPTICAL, 96 KHz, (384.0 KHz may be achieved, but not guaranteed)

Connections Digital Inputs

IN5 : SPDIF RCA, 75Ohms (IN5 can be set as SPDIF Output by Signal Processor)

Sampling Frequencies

PCM: 44.1KHz, 88.2KHz, 176.4KHz, 352.8 KHz, 48.0KHz, 96.0KHz, 192.0KHz, 384.0 KHz
DSD: x64, x128, x256, x512

Based on

CT 7302

Clock performances

+/- 2ppm typ. at 25°, +/- 10ppm at 60°

Digital Filter

Fixed Slow Mode, based on TI DF1706

Connections Outputs

Line RCA output, XLR Balanced

Outputs Voltage

3.0 V RMS (+10 dBV) RCA (at 0 dB), 6.0 V RMS (+16 dBV) XLR(at 0 dB)

Output Impedance

200 ohm

Analogue Output Filter

0,0 to 180 kHz +/- 3 dB

Analogue Stage Frequency Response

0,0 to 2MHz +/- 3 dB

Configuration

Solid state

Oversampling Filter

Fixed Slow Mode

D/A Converter

PCM 1704 Multibit 24 Bit D/A converter

I/V Conversion

I/V Conversion by proprietary topology with discrete component

Output Stage

Proprietary topology with discrete component, high linearity & low noise

Supply

230 V AC / 50 Hz, (100V AC or 115 VAC / 50-60Hz in some country)

Dimensions (HxWxD)

126 x 215 x 350 mm

Weight

5 Kg

Note

DAC Source with full remote control on PRE Version

DOWNLOAD


download driver

Ios / Windows


download manuals

Manuals / Certifications / Brochures

RELATED PRODUCTS