NORMA AUDIO ELECTRONICS
T. +39 (0) 372.493113 | E-Mail: info@normaudio.com
– Extreme low noise, high speed schematic topology and wide band ( >2 MHz )
– Separate power supply for Gain, Driver and Output stages.
– High speed and low noise regulated power supply for gain and driver stage.
– High current MOS-FET power device (200 A output peak current).
– 16 power device for a total rated 2.000 W power handling capability.
– High filtering capacity (70.000 uF) with numerous (24) low impedance capacitors.
– Full aluminium non-magnetic frame.
– Toroidal power transformers specially designed for audio applications, low flow dispersion, low mechanical noise, high permeability magnetic core with consequent low output impedance, 2 x 400 VA.
– Inputs configurable RCA (unbalanced) & XLR (balanced).
– Inputs selection by relay with GOLD/PALLADIUM contacts.
– RCA solid core gold plated plug connector for any signal connections.
– DC Protection for sensitive speakers.
Connections
1 RCA, 1 XLR Balanced
Input Impedance
47Kohm (non sel. input) / 33Kohm (sel. input)
Outputs Voltage
1 Binding Post couple, 4mm Banana and forks
Frequency Response
0 Hz – 2.0 MHz (-3dB, non filtered)
Output Power
150W RMS / 8Ohm – 280W RMS / 4 Ohm (per channel)
Gain, Sensitivity
28.5 dB, 1.30 V r.m.s. / 150 W – 8 Ohm
Configuration
Dual Mono
Configuration
Solid state
Power devices
MosFet, 4 couple each channel
Available output current
48 A continuous, 200 A peak (each channel)
Capacity of filter
72.000 Uf, 12 capacity for each channel
Electric Transformers
2 toroidal special audio use, 400 VA each channel
Supply
230 V AC / 50 Hz (100V AC or 115 VAC / 50-60Hz in some country)
Dimensions (HxWxD)
110x430x365mm (excluding footers and rear connections)
Note
Stereophonic final amplifier
Weight
25 Kg